Synapse Wireless Lighting Controller Matrix
| Wireless | All Devices are 2.4 GHz, SNAP Networking Mesh OS |
| AC Power | All AC Devices are rated from 100 - 277 VAC, ± 10% |
| DC Power | All DC Devices are rated from 5V to 24V DC ± 10% |
| Dimming | All Devices use 0-10V Dimming, Capable to source and sink Current, Max Source/Sink |
| Sensor Power | 24V at 50mA |
| Sensor Inputs | Select Input via Simply SNAP. Photo Cells = 0-10V input; Motion Sensors = 24V input |
| Relay | All Relays are Default On; Latching unless designated |
| Terminal Blocks | All Devices have terminal Blocks unless noted |
| Metal Cases | All Metal Cases are grounded and have ground screws on the side of the case |
| Product (Status) | Input Voltage | Dimming Current Max in mA -- Source/Sink | Power Monitoring | Sensors Input/ Output | Sensor Power | Relay | Relay Amps | Output Pwr in dBm | Certifications | Operating Temperature | Case / Board | Target Market |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dim10-100-00 | AC | 10/10(5) | No | 0/0 | No | Yes | 3 | 20 | FCC, IC, CE, c(UL)us | -20 to +60C | Metal | Indoor, High Bay, Linears, Troffers |
| LP150-001 | AC | 30/30 | No | 0/0 | No | Yes | 3 (6) | 15 | FCC, IC, CE, c(UL)us | -40 to +60C | Plastic - IP65, Leads | Outdoor - Poles, Fixtures |
| Dim10-250-11 | AC | 20/50(5) | 2% | 1/0 | Yes | Yes | 5 | 20 | FCC, IC, CE, c(UL)us | -40 to +55C | Metal | Outdoor Poles, Power Monitoring, Sensor Integration |
| Dim10-281-21 | AC | 20/50(5) | 2% | 2/1 | Yes | Yes | 5 | 20 | FCC, IC, CE, c(UL)us | -40 to +55C | Board | Sensor Integration, Power Monitoring |
| Dim10-283-20 | AC | 30/30 | 3% (1) | 2/0 | No | No | NA(4) | 20 | UL, FCC | -40 to +60C | Board with Leads | External Relays, Larger Loads |
| AIM-121 | AC | NA | No | 2/1(7) | Yes | No | NA | 20 | FCC, IC, CE, c(UL)us | -40 to +55C | Metal | Sensor Integration |
| TL5-B1 (8) | AC | 10/10 | 2% | 0/0 | No | Yes | 5 | 20 | FCC, IC, UL | -40 to +70C | Plastic | Outdoor, Fixture Mount |
| TL7-B1 (9) (Q4 16) | AC | 10/10 | 2% | 2/0 (2) | No | Yes | 5 | 20 | FCC, IC, UL | -40 to +70C | Plastic | Outdoor, Fixture Mount |
| Dim10-087-00 (3) | DC | 10/10 | No | 0/0 | No | No | NA(3) | 20 | CE, FCC, IC | -40 to +85C | Board | Low Cost Embedded in Fixtures |
- 100 to 480V Power Monitoring, requires 100 to 277 input voltage to power Radio, etc.
- one 24Volt Sensor Input & one 3 Volt Sensor Input
- Requires DIM to Off LED Driver that supplies 12V at 100mA
- Off Board Relay controlled with a 12V DC Signal from the 283
- Class 1 / 2 Dimming Wires
- Non Latching Relay
- Auxillary Output, 40mA Max, Sink Only
- NEMA Socket, TL5 has the 5 Pin Socket for 0 - 10V Dimming outputs to the Fixture
- NEMA Socket, TL7 has the 7 Pin socket which has Dimming outputs to the fixture + 2 Sensor Inputs